Configuring Event Settings
95
•
Buzzer Select the check box to activate a buzzer noise at
the DVR.
• Log Click to enable the DVR to record a local alarm log.
• Voice Prompts Select to enable audio broadcast/voice prompts in
response to a motion detection event.
• File Name Select a file for the voice prompt.
6. Click Apply to save your settings.
Configuring Alarms
If your IP camera has alarm ports and alarm/event functions, then the DVR can receive the alarm
message from the camera, and react by recording video, taking a snapshot, and/or sending an
email.
Configuring Remote Alarms
Configure the DVR to record video, take a snapshot, activate a PTZ camera preset,/tour/pattern,
and/or send an email if the DVR detects an issue with the I-View Now software.
Click Remote Alarm in the Alarm configuration interface to open the Remote Alarm
configuration interface.
Figure 10-11 Remote Alarm Configuration Interface
To Next Page
Loading...
