Performance Series HQA Digital Video Recorder Local User Guide
106
11. Configuring Storage Settings
This chapter contains the following sections:
• Configuring the Configuring the Basic Settings, page 106
• Configuring the Video Recording Schedule, page 107
• Configuring HDD Settings, page 110
• Configuring FTP, page 111
• Configuring Record Settings, page 111
• Configuring HDD Diagnostic Settings, page 112
Configuring the Basic Settings
Go to Main Menu SETTING STORAGE BASIC.
Figure 11-1
HDD Full: Set to Overwrite to continue recording over old data when the HDD is full. Set to
Stop Record to stop recording when the HDD is full. The default setting is Overwrite.
To Next Page
Loading...
