Honeywell HRHT4041 - Configuring Auxiliary Settings

Viewing Live Video
37
Figure 3-19
2. Click the Preset button again to stop calling the preset.
To call a tour
1. On the expanded PTZ control panel, in the No. box, enter the number of the tour that you
want to call, and then click the Tour button.
Figure 3-20
2. Click the Tour button again to stop calling the tour.
To call a pattern
1. On the expanded PTZ control panel, in the No. box, enter the number of the pattern that
you want to call, and then click the Pattern button.
Figure 3-21
2. Click the Pattern button again to stop calling the pattern.
Configuring Auxiliary Settings
Refer to the user guide of your PTZ camera for details on configuring auxiliary settings.