Honeywell HRHT4041 - Changing a Camera Name; Changing a Channel Type

Performance Series HQA Digital Video Recorder Local User Guide
66
Changing a Camera Name
By default, the cameras are named "CAM 1", "CAM 2," "CAM 3," and so on. You can assign each
camera a descriptive name specific to your application (for example, "Front Entrance").
To rename a camera
1. Go to Main Menu  Setting  Camera  CAM Name.
Figure 8-7
2. Click the text box of the camera that you want to rename and enter the new camera name.
3. Click Apply to save your settings.
Changing a Channel Type
By default, the analog channel type is set to Coax. You can change the channel type to UTP if
unshielded twisted pair (UTP) cabling is used.
To change an analog channel to UTP
1. Go to Main Menu  Setting Camera  Channel Type.