Configuration | 81
800-22740 - A - 02-2017
1. Click Schedule in the Storage selection tree to open the Schedule configuration
interface.
Figure 3-44 Schedule Configuration Interface
The schedules are color-coded by type:
• Green: General recording/snapshot.
• Yellow: Motion detection recording/snapshot.
• Red: Alarm recording/snapshot.
• Blue: MD&Alarm recording/snapshot.
• Orange: Intel recording/snapshot.
Table 3-18 Scheduled Storage Settings
Setting Description
Channel Select a channel from the drop-down list
Pre-record Enter a pre-recording time here. Select from 0 to 30.
Redundancy You can configure the NVR to backup recorded files onto two
different HDDs. Click to enable.
Note Before you can enable this function, you must
configure at least one HDD as redundant. Go to
Storage
HDD Manage.
This function is not available if there is only one HDD.
To Next Page
Loading...
