www.honeywell.com/security
84 | Performance Series HQA Digital Video Recorder Remote User Guide
Configuring Manual Recording Storage Settings
Figure 3-47 Manual Recording Storage Interface
Table 3-20 Recording Storage Interface
Setting Description
Channel See the channel numbers, including the maximum number of
channels.
Status Select a status for each channel: Schedule, Manual, and
Stop.
Schedule Select Schedule, and the system enables the automatic
recording function as you set it in the Recording Schedule
Setup: General, Motion Detection, or Alarm.
Manual This is the highest priority. Enable the corresponding channel
to record not matter what period was applied in the
Recording Setup.
Stop Stop recording the current channel no matter what recording
setup is applied to that channel.
Start All/Stop All Click the All button, and then enable or disable recording on
all channels.
To Next Page
Loading...
