Performance Series HQA Digital Video Recorder Local User Guide
100
is cancelled.
• Voice Prompts Select to enable audio broadcast/voice prompts in
response to a motion detection event.
• File Name Select a file for the voice prompt.
5. Click Apply to save your settings.
Configuring for User Errors
To configure user event settings
1. Go to Main Menu Setting Event Abnormality User.
Figure 10-14
2. On the User tab, in the Event Type box, select the event type that you want to configure
settings for: Illegal Login.
3. Select the Enable check box to enable user error detection.
4. Select the number of allowable Attempts before the action is taken, from 0 to 255.
5. Select how long the action (lockout) lasts, from 0 to 60 minutes.
6. Select the actions that you want the system to initiate when the selected event occurs:
• Send Email Select the check box to enable the system to send
an email notification.
• Buzzer Select the check box to activate a buzzer noise at
the DVR.
• Log Click to enable the DVR to record a local alarm log.
• Voice Prompts Select to enable audio broadcast/voice prompts in
response to a motion detection event.
To Next Page
Loading...
