Configuring System Settings
125
Configuring ATM/POS (Card Overlay) Settings
The ATM/POS (card overlay) settings allow the DVR to communicate with automated teller
machines (ATMs) and point of sale (POS) machines in a retail environment.
Configuring COM Settings
To configure the COM settings
1. Go to Main Menu Setting System ATM/POS Com.
Figure 12-10
2. On the Com tab, configure the following settings:
• Protocol Select None or POS.
• Overlay Channel Select a camera.
• Overlay Mode The Preview and Record overlay modes are enabled
by default. Clear the check boxes if you want to
disable them.
• Overlay Position Select Top Left, Bottom Left, Top Right, or Bottom
Right.
3. Click Apply, and then click Save to save the settings.
Configuring Net Settings
You can configure the network settings with or without the ATM/POS protocol.
To configure the network settings with the ATM/POS protocol
To Next Page
Loading...
