Performance Series HQA Digital Video Recorder Local User Guide
98
Configuring HDD Event Settings
To configure HDD event settings
1. Go to Main Menu Setting Event Abnormality HDD.
Figure 10-12
2. On the HDD tab, in the Event Type box, select the event type that you want to configure
settings for: No HDD, HDD Error, HDD No Space.
3. Select the Enable check box to enable HDD error detection.
4. Select the actions that you want the system to initiate when the selected event occurs:
• Show Message Select the check box to enable a pop-up message
on your local host PC.
• Alarm Upload Select the check box to enable the system to
upload an alarm signal to the network (including to
an alarm center and/or web client).
• Send Email Select the check box to enable the system to send
an email notification.
• Buzzer Select the check box to activate a buzzer noise at
the DVR.
• Log Click to enable the DVR to record a local alarm log.
• Voice Prompts Select to enable audio broadcast/voice prompts in
response to a motion detection event.
• File Name Select a file for the voice prompt.
5. Click Apply to save your settings.
To Next Page
Loading...
