Configuring Event Settings
103
Video Matrix
Click to enable. When an alarm occurs, the SPOT OUT port video (a 1-
window tour) from the alarm activation channel selected in the Record
Channel.
Buzzer
Click to enable the Buzzer function. When an alarm occurs, the buzzer
beeps.
Log Click to enable the DVR to record a local alarm log.
Voice Prompts
Select to enable audio broadcast/voice prompts in response to a motion
detection event.
File Name Select a file for the voice prompt.
5. Click Apply to save your settings.
Configuring Humidity
To configure the Humidity:
1. Go to Main Menu Setting Event IOT Humidity.
Figure 10-16
2. On the Humidity tab, select the Channel you want to configure and input the Alarm Name.
3. Select the Enable check box to enable Humidity configuration.
4. Select the actions that you want the system to initiate when the selected event occurs:
To Next Page
Loading...
