Honeywell HRHT41612 - Viewing Network Load Information; Viewing Network Test Information

Performance Series HQA Digital Video Recorder Local User Guide
148
2. Click the Block for icon in the user list, and then, in the Block for box at the bottom of the
screen, enter the time in seconds that you want to block the user for. You can enter up to
65535 seconds (18.2 hours).
Viewing Network Load Information
To view network load information
Go to Main Menu  Info  Network  Load.
Figure 13-14
On the Load page, you can view the network adapter name, MAC address, status (Succeed or
Failed), device IP address, network type, the maximum transmission unit (MTU), send speed,
and receive speed.
Viewing Network Test Information
To test the network
1. Go to Main Menu  Info  Network  Test.