Performance Series HQA Digital Video Recorder Local User Guide
62
•
NR Select a value between 0 and 100. The default setting is 50.
6. Click Apply to save your settings.
Configuring Encoding Settings
To configure a camera’s video and audio encoding settings
1. Go to Main Menu Setting Camera Encode.
Figure 8-3
2. On the Encode tab, in the Channel box, select the camera that you want to configure.
3. Configure the following settings for the primary stream and secondary stream:
• Type Set the primary stream type as Regular, MD (Motion
Detection), or Alarm. The secondary stream type is not
configurable.
• Compression This setting is not configurable.
• Smart Codec Select Start from the drop-down menu to enable the Smart
Codec function, which reduces the video bit stream for
non-important recorded video to maximize storage space.
• Resolution Set the primary stream to one of the following resolutions:
2560 x 1440, 1080P, 720P, 960H, D1, HD1, 2CIF, or CIF.
Set the secondary stream to one of the following
resolutions: D1, CIF, or QCIF.
• Frame Rate Select a value between 1 and 30 (NTSC) or 1 and 25 (PAL)
for the Main Stream. Select a value between 1 and 15
(NTSC) or 1 and ? (PAL) for the Main Stream.
• Bit Rate Type Set to CBR (constant bit rate) or VBR (variable bit rate).
To Next Page
Loading...
