Honeywell HRHT41612 - Configuring Advanced Network Settings

Configuring Network Settings
75
Figure 9-4
2. On the 3G/4G Setting page, you can configure the following settings:
• Ethernet Card Select the wireless network adapter name.
• Enable Select or clear the check box to enable or disable 3G/4G
wireless connection using the selected wireless network
adapter.
• Network Type Select the network type that meets your requirements.
• APN Select the wireless connection server that you want to use
to access the wireless network.
• AUTH Select the authentication mode that you want to use to
access the wireless network: PAP or CHAP.
• Dial Number Enter the 3G/4G network dial-up number that you received
from your Internet service provider.
• User Name Enter a user name for logging on to the 3G/4G network.
• Password Enter a password for logging on to the 3G/4G network.
• Dial Click Dial to manually enable or disable the 3G/4G network
connection.
3. Click Apply to save your settings.
4. If you want to exit the Setting menu, click OK.
Configuring Advanced Network Settings
This section describes how to configure PPPoE, DDNS, SYNC TIME, EMAIL, UPnP, SNMP,
MULTICAST and P2Psettings.