Configuration | 101
800-22740 - A - 02-2017
Importing/Exporting Setup Files
Figure 3-70 Import/Export Interface
Restoring to Defaults
You can select to return Channel, Network, Event, Storage, and/or System settings to their
defaults. Click to select, or select All, then click Set Default.
Figure 3-71 Default Settings Interface
Upgrading the Firmware
Figure 3-72 Upgrade Interface
1. Click Browse, then click to select the upgrade file.
2. Click Upgrade to begin the update.
The file name will end with .bin.
Note During the upgrade process, do not unplug the power cable, network cable, or
shut down the device.
Table 3-29 Import/Export Operations
Activity Description
Config Import Use to import local setup files to the DVR system.
Config Export Use to export the corresponding WEB setup to your local PC.
To Next Page
Loading...
