Live Viewing | 29
800-22740 - A - 02-2017
Figure 2-2 Image Settings
1. Click to select one channel’s video. The currently selected channel border turns Green to
indicate it is selected.
2. Click the Image adjustment buttons in Section 8. See LAN Mode Main Window on page
18.
To return the DVR system to default settings, click Reset.
Note All of these configurations apply to the Web Viewer only.
Information
Click Info on the toolbar in Preview mode to open the Info window.
Table 2-3 Image Settings
Setting Description
Adjusts the monitor’s video brightness.
Adjusts the monitor’s video contrast.
Adjusts the monitor’s video hue.
Adjusts the monitor’s video saturation.
Restores the system to its defaults value.
Reset image equilibrium.
To Next Page
Loading...
