www.honeywell.com/security
96 | Performance Series HQA Digital Video Recorder Remote User Guide
Configuring the Voice Schedule
Click Schedule in the Voice configurations interface to open the Schedule configurations
interface
Figure 3-62 Voice Schedule Configurations Interface.
1. Click to enable a Period, and enter beginning and end times for the period.
2. Select a File Name from the drop-down menu.
3. Enter an Interval, which is how long the audio file lasts. The default is 60 minutes.
4. Enter a Repeat Playback value, which is how many times the audio file repeats.
5. Select an Output from the drop-down menu.
6. Click OK.
Configuring Accounts
Some Basic User and Group Rules
• You can use up to 31 characters for user names and up to 15 characters for group names.
You can not use a space at the beginning or end of a name. You can use characters,
numbers, and an underline (_).
• You can add up to 64 users and 20 groups (these are also the default settings). The
default setting includes two group levels: user and admin. Configure the Group privileges,
and then assign users to their groups according to the privileges those users require.
• User management involves assigning privileges to groups, and users to groups. User
names can not be the same as group names; user names and group names must be
unique. Users can belong to only one group.
Click Account in the General settings configuration interface to open the Account settings
configuration interface.
To Next Page
Loading...
