Performance Series HQA Digital Video Recorder Local User Guide
108
green bar.
• MD The motion detection recording schedule is
indicated by a yellow bar.
• Alarm The alarm recording schedule is indicated by a red
bar.
• MD&Alarm The motion detection and alarm schedule is
indicated by a blue bar.
• Intel Intelligent identification recording, or Face
Detection recording, is indicated by an orange bar.
6. At the left of the scheduling table, select the day(s) of the week that you want to configure
a recording schedule for. To configure the same recording schedule for all of the days at
the same time, select All.
7. Click or drag the mouse in the scheduling table to set the recording period. To erase a
recording period, click the eraser icon at the right of the table. Alternatively, for the day of
the week that you want to configure, click the gear icon at the right of the table. In the
Period window, set up to six recording periods. To copy the settings to additional days,
select the appropriate check box(es) under Copy, and then click Save.
8. Click Apply to save your settings.
9. To copy the settings to additional channels, click Copy, select the channels that you want
to copy the settings to, and then click OK.
Configuring the Snapshot Recording Schedule
Follow these steps to configure the snapshot recording function. When enabled, the DVR can
take snapshots when a motion detection, video loss, video tampering, or alarm event occurs.
See Chapter 10, Configuring Event Settings for detailed instructions.
To configure the snapshot recording schedule
1. Go to Main Menu Setting Storage Schedule Snapshot.
To Next Page
Loading...
