Performance Series HQA Digital Video Recorder Local User Guide
112
4. Click Apply to save your settings. To test the FTP connection, click Test.
Configuring Record Settings
To configure record settings
1. Go to Main Menu Setting Storage Record.
Figure 11-6
2. On the Record page, select the record types (Schedule, Manual, Stop) that you want to
enable on each channel for both the main stream and secondary stream.
3. Under Snapshot, enable or disable snapshot recording on each channel.
4. Click Apply to save your settings.
Configuring HDD Diagnostic Settings
To run a diagnostic test on the HDD
1. Go to Main Menu Setting Storage HDD Detect Detect.
To Next Page
Loading...
