Honeywell HRHT4164 - Configuring Account Settings

Configuring System Settings
117
3. Click Apply to save your settings.
Configuring Date and Time Settings
To configure the system time setting
1. Go to Main Menu  Setting  System  General  Date&Time.
Figure 12-2
2. On the Date&Time tab, configure the following settings:
• Date Format Select the date format that you want to use for the
system time: YYYY MM DD, MM DD YYYY, or DD
MM YYYY.
• Time Format Select the time format that you want to use for the
system time: 24-Hour or 12-Hour.
• Date Separator Select the separator that you want to use for the
system time: period (.), hyphen (-), or forward slash
(/).
• System Time Enter the system time and time zone, and then click
Save.
3. Click Apply to save your settings.
To configure the Daylight Saving Time (DST) setting
1. Go to Main Menu  Setting  System  General  Date&Time.
2. On the Date&Time tab, select the DST check box.
3. Specify when Daylight Saving Time begins and ends.
a. Since the specific dates change every year, select Day of Week as the DST Type.