Honeywell HRHT4164 - Configuring General Record Settings; Configuring the Video Recording Schedule

Recording Video
39
Configuring General Record Settings
To configure general record settings
1. Go to Main Menu  Setting  Storage  Record.
Figure 4-1
2. On the Record page, select the record types (Auto, Manual, Stop) that you want to enable
on each channel for both the main stream and sub stream.
3. Under Snapshot, enable snapshot recording on the desired channels.
4. Click Apply, and then click OK.
Configuring the Video Recording Schedule
To configure the video recording schedule
1. Go to Main Menu  Setting  Storage  Schedule  Record.