EasyManua.ls Logo

Honeywell hus-nvr-1032-e - Operating Keys

Honeywell hus-nvr-1032-e
85 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction
6
Accessories box
CD 1
Power cord 3
GIGA LAN CABLE, 3000mm, CAT-5E 1
6#-32 * 1/4 FM 32
M6*12 PB 2
Quality certification 1
Terminal Blocks 4
Quick Guide 1
Desiccant (SILICA)
1
Remove the protective film on the NVR after the above procedures.
Operating Keys
Front View
Figure 2-1 Front View
Table 2-3 Name and Description of Keys (Front View)
No. Symbol Name Function
1
ON/OFF Switch
Hold it down for over 5 seconds to turn on
the NVR.
When NVR is turned on, hold the button
down over 5 seconds to turn NVR off.
2
Panic Recording
Key
Hold it down for over 1 second to start/stop
the panic recording.
3 STATUS
System Status
Indicator
After pressing the ON/OFF Switch, the
blue (Off) the system is starting;
Blue (On) the system is running properly;
Red (Flashing) – system exception.

Table of Contents

Other manuals for Honeywell hus-nvr-1032-e

Related product manuals