Honeywell
63
In the above window, you can set time zone, date, time and whether to synchronize with
NTP automatically. Click Advanced Settings and the below window is displayed:
Figure 5-68 Advanced Settings
You can set date and time format, NTP server and port.
Enable “DST” (Daylight Saving Time) option to display the window as in the following figure:
Figure 5-69 DST
Audio
Click the “Audio” to enable mute and adjust volume as shown in the following figure:
Figure 5-70 Live Audio
Only when “Live Audio” option on this screen is enabled, can user adjust the volunm on Live
screen.
System Management
Click “System Management” and the below window is displayed:
To Next Page
Loading...
