IHR810 User Manual
www.impactbyhoneywell.com
14.
3. Click "Set New IP" button, the computer will wait for 10 seconds before a prompt window appears indicating successful
setting. In the process of resetting IP, the computer will be cut down and then automatically reconnect as shown in the
picture below:
4. After the prompt window indicating “printer address successfully set " appears, print self test page again to see if the
IP address has been modified, as shown in the picture below:
Note: if the above methods to modify the IP address are not successful, it’s suggested that the computer IP address and
the printer IP address shall be set within the same network segment: 192.168.123. XXX, before connecting the
printer (excluding the router method) to the computer and using utility tools to modify the IP. Specific method is as follows:
1. Click online neighbors - local connection - property - Internet protocol, then manually configure IP as shown in the
following pictures:
To Next Page
Loading...
