MAN0597 ISSUE 08 - 02/04
2302M5030
CONTENTS
Section Page
10
Contents
1. INTRODUCTION 16
1.1 Intended use 17
1.2 Product overview 18
2. GETTING STARTED 20
2.1 How to turn Impact/Impact Pro on and off 20
2.2 Inserting the cartridge 21
2.3 Charge for first use 22
2.4 Dry-cell Battery insertion 25
2.5 Sampling 26
3. INSTRUMENT START-UP 28
3.1 Instrument information 28
3.2 Selecting location / operator 29
3.3 Fresh Air Auto zeroing sensors 29
3.4 Sensor Warm-up Phase 30
4. OPERATION 31
4.1 Monitoring Condition 31
4.1.1 Display Screens 31
4.1.2 Other Displayed Symbols 33
4.1.3 Confidence Signal 34
4.1.4 Go/No Go Option 34
4.2 Atmospheric alarm conditions 35
4.3 Alarm condition 36
4.3.1 Latching Alarms (default) 36
4.3.2 Non-latching Alarms 36
4.3.3 Vibrating alarm (where fitted) 36
4.3.4 Resetting an Alarm 37
4.4 Fault and Warning Condition 37
4.4.1 Warning 37
4.4.2 Fault condition 38
4.5 Safelink 38
4.5.1 What is Safelink? 38
4.5.2 Using Safelink 39
4.6 PUMP (IMPACT PRO ONLY) 42
4.6.1 Removal of the Pump Adaptor 47
To Next Page
Loading...
