EasyManua.ls Logo

Honeywell Impact - Warning Codes

Honeywell Impact
114 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAN0597 ISSUE 08 - 02/04
2302M5030
11. APPENDIX A
101
11. APPENDIX A
11.1 WARNING CODES
Number Message Action or Reason
8 Replace batteries. Battery unchargeable. Replace the
battery pack.
9 Cartridge expired Fit new cartridge.
10 Cartridge expires in nn
days
Fit new cartridge.
11 Calibration due Calibration is due soon. Recalibrate or
fit new cartridge.
14 Battery low Recharge battery or fit new battery
pack.
16 Pump fault The pump is expected but not
fitted.
The pump calibration has failed.
17 Pump blocked Check and remove the blockage.
Check for water or dust in the
sampling tube.
Once the above has been checked,
press the " button to restart the
pump.
19 Passed install by date Cartridge has exceeded its storage
life. Fitting cartridge will reduce
lifetime of cartridge and affect
warranty.
20 See manual Cartridge not being activated. Contact
Service Centre
24 Please recharge or
replace batteries
Insufficient battery voltage to operate
the Enforcer. Recharge battery or
replace the battery pack.
25 Calibration required. Recalibrate or fit new cartridge.

Table of Contents

Related product manuals