Honeywell Impact - Safelink Connection Drawing

MAN0597 ISSUE 08 - 02/04
2302M5030
12. APPENDIX B
110
12.2.2 Safelink Connection Drawing
Notes: 1. Only two units may be permitted to be connected.
2. Safelink cable assembly is connected to ‘Data
Connector’ on base of impact portable and retained
via 2 position screws into baseplate.
3. Cable is 2 connector with overall foil/braid shield.
PIN 14 Connects to braid/screen
4. Alternatively, interconnection may be made between
impact units located in hazardous and non
hazardous areas.
Data Connector Data Connector
PIN 12 (CAN H) PIN 12 (CAN H)
PIN 13 (CAN L) PIN 13 (CAN L)
PIN 14 (DGND) PIN 14 (DGND)
Impact Portable Unit 1 Impact Portable Unit 2
Screw
4 positions
Ferrite
torroidal core
Cable
Overall foil/braid shield
Length between plugs = 100 Meters max.