MAN0597 ISSUE 08 - 02/04
2302M5030
4. OPERATION
50
4.7.3 Calibration
See Section 4.9 Calibration for full details.
4.7.4 Instrument Details
Several screens are available detailing the instrument set-up,
such as alarm levels. These can be viewed by pressing the
!
and # buttons to cycle through them. Some examples are
shown below and these are indicative only. Information shown
will vary according to model, country, product application and /
or specific requirements.
This information is also available at
switch-on of the instrument (see
section 3.1 for details).
These are the alarm level settings for
oxygen and flammable sensors.
There are no associated STEL or
LTEL alarms for these sensors.
↑ indicates a rising alarm and ↓
indicates a falling alarm.
This shows the alarm levels for the
toxic sensors.
The following displays indicate whether particular options are
fitted and how the instrument is currently configured.
Software Revision
Version 2.6
Serial Number
0000000000
Calibration Due
in 34 days
10.0
40.0
50.0
10.0
5.0
35
400
500
200
30
A1
A2
A3
STEL
LTEL
CO ppm
H2S
ppm
Pump
Fitted
Data Logging
Event
Safelink
Fitted
Last Calibration
1 Jan 2001
Autozero
Enabled
Gas Alarms
Latched
Battery
Rechargeable
Vibrating Alarm
Enabled
Language
English
To Next Page
Loading...
