MAN0597 ISSUE 08 - 02/04
2302M5030
6. ACCESSORIES
65
6. ACCESSORIES
WARNING
DO NOT ATTEMPT TO CHARGE THE BATTERY PACK
IN THE HAZARDOUS AREA.
The following accessories are available for use with Impact/
Impact Pro.
6.1 BASESTATION
(Part Number: P2302B0800)
This unit provides a smart charging
facility for instruments powered by
rechargeable NiMH batteries. The
instrument is simply inserted into the
base station whereby it is fast
charged. The instrument controls the
charging process and will indicate
when it is fully charged, and then
change to a trickle charge mode to
keep the battery topped up until the
instrument is required.
The basestation also provides a facility to connect the
instrument to a PC, for downloading of logged data, viewing or
changing instrument configuration information, or as a means
of instrument calibration.
Ensure that the instrument is not inserted backwards into the
basestation. Firstly locate the lip at the front of the instrument
into the corresponding recess, and then latch the rear catch.
To release pull back the rear catch (see Section 2.3 Charge for
first use).
If the instrument is switched on whilst placed in the basestation
the instrument will not reach full capacity (typically only 85% if
switched on for the entire fast charge period).
To Next Page
Loading...
