MAN0597 ISSUE 08 - 02/04
2302M5030
6. ACCESSORIES
66
The basestation accepts an input of 12Vdc to 32Vdc.
Basestations may be daisy-chain linked. See Section 6.3
Basestation PSU Link Cable.
6.2 BASESTATION PLINTH
(Part Number: P2302B0804)
The basestation can also be mounted
desk-mounted or vertically, singly or
stacked using the optional plinth. To
mount the basestation vertically
remove the base plate and rotate. To
mount in a vehicle remove the base
plate to reveal two mounting holes, for
screwing the basestation to the
vehicle bodywork or suitable framing.
6.3 BASESTATION PSU LINK CABLE
(Part Number: 2302D0821)
Allows basestations to be linked
together, to a maximum of 5,
minimising cabling and power
sockets, and forming a multibank
charger.
Due to the potential variety of applications and installations
Zellweger Analytics do not supply such power supplies. The
requirements are 12Vdc to 32Vdc, rated at 500mA per
basestation.
WARNING
The standard Power Supply unit must not be used when
connecting multiple Base Stations. Overheating of the
Power Supply and ultimately failure will result.
To Next Page
Loading...
