MAN0597 ISSUE 08 - 02/04
2302M5030
6. ACCESSORIES
68
CAUTION
These individual Power Supplies will only supply power to
one Basestation or one Trickle Charger.
6.6 ENFORCER
(Part Number: 2302B0831)
This test and calibration accessory is
only for use with instruments fitted
with any combination of oxygen,
flammable, carbon monoxide and
hydrogen sulfide sensors. Its
operation is described in Section 4.9.4
Enforcer Calibration. This is supplied
complete with an Enforcer disposable,
multigas cylinder.
For EMC/RFI Enforcer is tested to EN50270 Light Industrial
Type 2.
6.7 ENFORCER GAS CYLINDER
(Part Number: 2302D0833)
The Enforcer requires a gas cylinder with pre-set
concentration values, and a specific valve to maintain the
required low pressure and flow rate, which enables the
Enforcer to operate quickly and simply.
12 3 4 5
To Next Page
Loading...
