MAN0597 ISSUE 08 - 02/04
2302M5030
6. ACCESSORIES
73
6.19 SENSING PROBE 1M
(Part Number: 2302B0847)
Used with the bulb operated hand
aspirator or the internal pump if fitted,
it allows sampling from above normal
height areas or into areas of low
accessibility. Ensure that the sections
of the sampling probe are tightened to
prevent dilution of the sample.
6.20 BALL FLOAT
(Part Number: 2302B0846)
Clips to the end of the sampling tube
being used, and provides the dual
function of preventing liquid entering
the instrument and also breaking the
surface tension of any liquid to release
trapped gas.
To Next Page
Loading...
