EasyManua.ls Logo

Honeywell Impact - Important Notice

Honeywell Impact
114 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAN0597 ISSUE 08 - 02/04
2302M5030
TOTAL ENVIRONMENTAL SOLUTIONS
8
WARNINGS
The Flammable Sensors sensitivity can be adversely
affected by exposure to certain substances (silicon and
sulphur compounds are examples). Every effort should be
made to avoid exposure to these substances. Following an
H
2
S alarm or repeated gassing with H
2
S a check should
be performed on the Flammable sensor to verify its
accuracy and a calibration performed if necessary.
If -0.0 Vol.% for the CO
2
sensor channel is permanently
displayed, a sensor zero (during boot procedure) or a zero
calibration needs to be performed in clean air. The alarm
level A1 for the CO
2
range must not exceed 0.5 Vol.%.
Dispose of the spent cartridge and its packaging in
accordance with local regulations. Do not dispose of in fire.
CAUTIONS
The IMPACT/IMPACT PRO must be serviced only by
qualified personnel trained by Zellweger Analytics or by a
Zellweger Analytics appointed agent.
IMPORTANT NOTICE
Zellweger Analytics Limited can take no responsibility for
installation and/or use of its equipment if this is not done in
accordance with the appropriate issue and/or amendment
of the relevant manual.
The user of this manual should ensure that it is appropriate
in all detail to the exact equipment to be installed and/or
operated. If in doubt, the user should contact Zellweger
Analytics Limited for advice.
If further details are required which do not appear in this
manual, contact Zellweger Analytics Limited or their agent.

Table of Contents

Related product manuals