Honeywell INTELLIGUARD 9000 - Deleting a Message; Removing a Message; Defining Areas Table

INTELLIGUARD 9000
74-3046
18
Deleting a Message
NOTE: This procedure deletes the selected message without changing the
message numbers for other messages.
1. Press F4 to display the System Messages table.
2. Click on the message to be deleted.
3. Click Delete to delete the message.
4. Click OK.
5. Click File to display the File pull-down table.
6. Click Save to save the change.
Removing a Message
NOTE: This procedure deletes the selected message and moves all following
messages up one line.
1. Press F4 to display the System Messages menu.
2. Click on the message to be removed.
3. Click Remove.
4. Click OK.
5. Click File to display the File pull-down menu.
6. Click Save to save the change.
Defining Areas Table
The Area Configurations screen has two types of fields, programmable and on/off.
Programmable fields accept or require inputs other than on and off. See Fig. 10.
Fig. 10. Area Configurations table. User programs a maximum of eight areas per I9000 CU.