INTELLIGUARD 9000
74-3046
30
COPYING FILES FROM THE I9000 TO A PC
Copy files from the I9000 to a PC for editing, printing, or archiving. Transfer
information from the I9000 Control Unit to the PC through a shielded RS-232 cable.
1. Connect the cable to the PC and the I9000.
2. Click Special to display the Special pull-down menu.
3. Click Comm. Port Settings to display the Comm. Port Settings screen. See
Fig. 19.
Fig. 19. Comm. Port Settings panel.
8. Click None to deselect all tables.
9. Click Polling to copy a list of all devices to the CU.
10. Click OK to begin the transfer.
11. After the transfer is complete, check in the CC-2 Configuration to make sure all
transfers are complete.
12. Select ASSIGN on the CC-2 if all devices respond (no F after the COM
number).
13. Repeat steps 6 through 7 to continue downloading.
14. Click Polling and iD to deselect them.
15. Click OK to begin the transfer.
To Next Page
Loading...
