Honeywell INTELLIGUARD 9000 - Page 52

52
A1 ### XXX ***5 AREA # 1, POINT #, AREA description.
ZONE description # 5.
Note 2: ### refers to the point number, such as; 105, 210…
Note 3: *** refers to any description of a zone, such as; door,
window…
A1 H-U 01 AREA # 1, Hold-Up Actuator # 1.
Actuator triggered.
A1 H-U 01 COMM AREA # 1, Hold-Up Actuator # 1.
Communication failure.
A1 H-U 01 TAMP AREA # 1, Hold-Up Actuator # 1.
Tamper device triggered.
BYP ID 01 Bypassed by user with ID # 01.
A1 IDC 1 COMM AREA # 1, Intelligent Digital Communicator # 1.
Communication failure.
A1 SAFE 1 COMM AREA # 1, Safe # 1.
Communication failure.
A1 SAFE 1 DOOR AREA # 1, Safe # 1.
Door open.
IPS 1 COMM Intelligent Power Supply # 1.
Communication failure.
IPS 1 AC FAIL Intelligent Power Supply # 1.
AC supply failure.
IPS 1 BATTERY Intelligent Power Supply # 1.
Battery failure.
IPS 1 TAMP Intelligent Power Supply # 1.
Tamper device triggered.
ID ? _ _ Enter your identification number.
CODE ? _ _ _ _ Enter your security code number.
AREA ? _ Enter the desired are number.
3. Message Description (continued)