EasyManua.ls Logo

Honeywell KMD 250 - Deleting the Active Flight Plan

Honeywell KMD 250
274 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-71
Rev 2 Apr/2004 KMD 250 Pilot's Guide
Section 1
Basic Operation
DELETING THE ACTIVE
FLIGHT PLAN
To delete the active flight plan
perform the following steps:
1. Press the FPL Key until the
FLIGHT PLAN INDEX Page is
displayed as shown in Figure
1-136. Note that the active
flight plan is highlighted in
magenta.
2. Press the DELETE Softkey
and Figure 1-137 will be dis-
played to verify the deletion of
the active flight plan.
3. Press the OK Softkey to
delete the active flight plan. As
shown in Figure 1-138, the
active flight plan is no longer
displayed. Note also that the
previously active flight plan has
not been deleted from the list of
stored flight plans.
NOTE: If the active flight plan
has not been stored prior to
deleting, press the COPY
Softkey to store a copy of the
active flight plan before
pressing the DELETE Softkey.
Flight Plan Operation
Figure 1-136
Figure 1-137
Figure 1-138

Table of Contents

Related product manuals