Honeywell L5100 Series User Manual

– 42 –
USER FUNCTIONS
USER FUNCTIONSUSER FUNCTIONS
USER FUNCTIONS
Message Recording and Playback
5000-100-046-V0
Message 1 2:48 PM September 1, 2010
Message 2 5:09 PM September 5, 2010
Add New Delete AllPlay
Ready To Arm
6. When you have finished recording, select
“2”. The system displays the recorded
messages.
7. To record additional messages (if recording
time is available) repeat steps 1 through 3.
NOTE: If you are trying to record a new message and the message center is already full, “Add New” will not
be displayed. If the message center is full all old messages must be deleted before new messages
can be recorded. See the Deleting Messages section.
Playing Message(s)
5000-100-046-V0
Message 1 2:48 PM September 1, 2010
Message 2 5:09 PM September 5, 2010
Add New Delete AllPlay
Ready To Arm
1. At the Message screen, select the
message you wish to play.
2. Select “Play”, the system plays your
message.
3. When you are finished listening to the
message, you may select. “Stop”. If “Stop”
is not selected the system continues to
play the remaining messages.
4. When you have finished listening to the
messages, select “2”. The system returns
to the Home Screen.
Deleting Messages
5000-100-046-V0
Message 1 2:48 PM September 1, 2010
Message 2 5:09 PM September 5, 2010
Add New Delete AllPlay
Ready To Arm
1. At the Message screen, select “Delete All”.
The system deletes all messages.
2. When you have finished deleting the
messages, select “2”. The system returns
to the Home Screen.

Honeywell L5100 Series Specifications

General

Brand	Honeywell
Model	L5100 Series
Category	Security System
Language	English