Honeywell L5100 Series User Manual

– 54 –
USER FUNCTIONS
USER FUNCTIONSUSER FUNCTIONS
USER FUNCTIONS
Automation
Ready To Arm
231
5
64
0
8
97
Clear
5000-100-147-V0
AM / PM
Enter Time
10:21 AM
Done
9. If Auto Stay is selected, select “Clear” then
enter a 4-digit time on the displayed keypad
then select “Save”. If “Rules” is selected
proceed to Step 11. If “Disarm Notification”
is selected proceed to Step 12.
10. Select “Rules” then select a Rule from the
displayed list (Rules 1 through Rules 20).
11. Enter a Start Time and End Time on the
displayed keypad then select “Save”.
12. Select the “2” button. The system returns to
the Automation programming screen.
Editing a Scheduled Function
Ready To Arm
5100-100-081-V0
Auto Arm
Daily
Edit
Delete
Add New
Schedule 1
Auto Stay
1. At the Schedules screen, select the
Schedule you wish to edit.
Note: Rules 21-40 are only accessible through
TotalConnect Service.
2. Select the “Edit” button. The Schedule
programming screen will appear. Follow the
steps as noted above in the programming a
Scheduled Function section to edit and
save your changes.
Deleting a Scheduled Function
Ready To Arm
5100-100-081-V0
Auto Arm
Daily
Edit
Delete
Add New
Schedule 1
Auto Stay
1. At the Schedules screen, select the
Schedule you wish to delete.
Note: Rules 21-40 are only accessible through
TotalConnect Service.
2. Select the “Delete” button. A confirmation
screen will be displayed. Select “Yes” to
confirm the deletion.
3. Select the “2” button. The system returns
to the Automation programming screen.

Honeywell L5100 Series Specifications

General

Brand	Honeywell
Model	L5100 Series
Category	Security System
Language	English