31
Garage Doors
Home > Automation > Garage Door
Garage door operation from the Gateway requires installation of a garage door control kit.
Consult your security professional for more information.
The Gateway can remotely operate and monitor as many as four garage doors. The system can
be armed when the garage door is opened. After it is closed, the zone will be monitored without
providing burglary protection.
Do not use Gateway’s garage door automation with any garage door opener
that lacks the safety features required by U.S. federal safety standards (this
includes any garage door opener model manufactured before January 1, 1993).
A garage door opener that cannot detect an object and stop and reverse the
door does not meet current U.S. federal safety standards. Your garage door
opener also must signal before unattended door operation. For more
information please consult your garage door opener manual.
NOTE: Press Switches on the Z-Wave Device Management menu to configure new
Z-Wave binary garage door openers. Ask your security professional for more
information.
Garage Door Operation from the Gateway
1. On the Home screen, select Automation.
2. On the Z-Wave Device (Automation) Management menu, press Garage Door. The
MyHome Gateway App screen displays the Open/Closed status of your connected
garage doors.
3. Select the garage door you wish to operate.
4. Press the button in the middle of the screen to open or close the garage door.
Edit
Press to rename the selected garage door. Use the on-screen keypad and press
To Next Page
Loading...
