Honeywell Lyric T5 Wi-Fi - Adjusting Backlight Brightness; Enabling;Disabling Smart Response

21
When the thermostat is in idle mode, you can
adjust how bright you’d like the screen. You
can choose a brightness level from 01 (display
backlight is dimmest, which is the default) up to
05 (maximum brightness). To adjust backlight
brightness, follow the steps below.
1 Touch Menu on the thermostat home screen.
2 Touch the or arrows until you see
BRIGHTNESS, then touch Select.
3 Touch or to adjust the brightness level,
which will change immediately.
4 Touch Done to confirm.
Adjusting backlight brightness
Over time, your Lyric T5 WiFi thermostat will
learn how long it takes your system to reach the
desired temperature. It can then turn on your
heating or cooling equipment at the right time to
make sure your home is comfortable by the time
you expect. This feature is enabled by default. To
disable it, follow the steps below.
1 Touch Menu on the thermostat home screen.
2 Touch the or arrows until you see
RECOVERY, then touch Select.
3 Touch the or arrows to select
RECOVERY ON or RECOVERY OFF, then
touch Done to confirm.
When Smart Response is active, you’ll see the
recovery symbol in the upper-right corner of the
thermostat screen.
Enabling/disabling Smart Response
AM
Menu FanMode
Fan
Auto
Mode
Heat
Wake AwayHomeSleep
Following Schedule
Recovery
Back Select
Back Select
Done Cancel
AM
Menu FanMode
Fan
Auto
Mode
Heat
Wake AwayHomeSleep
Following Schedule
Recovery
Done
Cancel
Recovery