Honeywell Lyric W1 - Getting Started with Lyric W1 Detector; Download the Lyric app; Install batteries

2
1 Download the Lyric app
Search for Honeywell Lyric in the
App Store or Google play.
After downloading, launch the app,
register (if necessary), go to Menu
and then go to Add New Device.
2 Install batteries
The detector is powered by 3 AA batteries (included). Pull open
the battery cover on the detector and install the
batteries.
When replacing the cover, press firmly
around the edges to ensure a snug
fit.
Note: Do not plug a power adaptor
into the cable sensor jack. Doing so
could damage the detector.
GET IT ON
Lyric
Need any help?
• Web: getconnected.honeywell.com
Cable
sensor jack
32325307_A.indd 2 3/7/2017 4:41:30 PM