Honeywell Lyric - Automation Features

Lyric Controller Programming Guide
Program System Settings
Programming Field
Function and Action
Programmed
Default
Entry Delay 1
Select an Entry Delay time in seconds. The system will wait the
selected time before sounding alarm upon entering, if system has
not been disarmed.
ETL:
The Entry Delay must be set for a maximum of 45 seconds.
Options:
None
90 Seconds
15 Seconds
2 Minutes
30 Seconds
3 Minutes
45 Seconds
4 Minutes
60 Seconds
30 Seconds
Entry Delay 2
Select an Entry Delay time in seconds. The system will wait the
selected time before sounding alarm upon entering, if system has
not been disarmed.
ETL:
The Entry Delay must be set for a maximum of 45 seconds.
Options:
None
90 Seconds
15 Seconds
2 Minutes
30 Seconds
3 Minutes
45 Seconds
4 Minutes
60 Seconds
30 Seconds
Exit Delay
Select an Exit Delay time in seconds for both Entry Delay 1 and 2
Zone Types. The system will wait the selected time before
sounding an alarm if the exit door is left open after the system has
been armed.
Options:
45 Seconds
60 Seconds
90 Seconds
2 Minutes
60 Seconds
Backlight Timeout
Disable or enable backlight turnoff after 30 seconds. The system
toggles between the available options.
NOTE:
The backlight timeout will not turn off when the panel is in
Program Mode or if any zone that prevents the panel from
being armed away is faulted.
Options:
No
30 Seconds
30 Seconds
Quick Arm
Disable or enable Quick Arm Mode. If enabled, pressing the AWAY
button (ICON) and then selecting the “Quick Arm” button on the
displayed keypad will arm the system. The system toggles
between the available options.
Options:
No
Yes
Yes
Quick Exit
Disable or enable Quick Exit Mode. If enabled the Exit Delay can
be restarted to allow entry or exit when the system is armed. The
system toggles between the available options.
Options:
No
Yes
Yes
- 21 -