Honeywell Lyric - Security Screen; Master User Tools Screen; Accessing the Master User Tools Screen

Lyric Controller Programming Guide
Mechanics of Programming (Continued)
Security Screen
System Status is displayed at the top of
each screen and the time and date are
displayed at the bottom of the Security
Screen. The Security Screen displays the
system status and selection “icons” and
“tabs”. The displayed pages and options
may vary slightly depending upon the
devices and services that are installed in or
connected to the system.
Security Screen
Selection
Function
Arm Away
Used to Arm the system in Away mode (displayed on both Security Screen pages).
Arm Stay
Used to Arm the system in Stay mode (displayed on both Security Screen pages).
Arm Custom
Used to Arm the system in Custom mode that arms specific selected zones (displayed on
both Security Screen pages).
System
Provides information about system status
Tools
Provides access to Installer and User Programming Menus (Master User Code required for
access).
Message
Provides access to Message Center.
Zones
Provides access to Zone information and options.
Message
Provides access to Message Center.
Settings
Provides access to various keypad functions (i.e.; Brightness, Volume, Voice & Chime).
Master User Tools Screen
The
Master User Tools screen provides access to
the User configurable features and displays
eight options. Entering the Master User Code is
required to access the User Menu.
Select the “〉”
to advance to the second
page of the User Tools
Menu Screen and the “
〈
” to return to the first
page.
Master User Tools Menu Screen (Page 1)
Accessing the Master User Tools Screen
You may find it convenient to adjust the volume setting before entering the Programming Mode.
This will allow you to clearly hear feedback announcements or system beeps.
1. At the Security Screen select the “Tools” icon then enter the Master User Code (1 + 2 + 3 + 4).
- 5 -