Honeywell Lyric - Data Fields; Change Installer Code; Change Language; Program System Type

Lyric Controller Programming Guide
DATA FIELDS
Change Installer Code
Programming Field
Function and Action
Programmed
Default
Installer Code
1. The current four-digit Installer Code is displayed on the left side
of the screen. Select “Clear”.
2. Enter a new four-digit Installer Code on the displayed keypad.
The system will display the new code on the left side of the
screen.
3. Select “Done” when you are finished.
4. The system returns to the “System Programming” Screen.
4112
Change Language
Programming Field
Function and Action
Language
1. If applicable, select “Language” to display the following options:
Installer Language User Language
2. Select “Installer Language” OR User Language. The system toggles between the
following options:
English
French
Spanish
Portuguese
3. Select the desired language.
4. Select “Save” when you are finished.
5. A confirmation screen appears. If “Yes” is selected, the System returns to the
second page of the Programming screen, which will be displayed in the selected
language.
Program System Type
Programming Field
Function and Action
Programmed
Default
RF Jam
Enable or disable RF Jam Detection, Log & Reporting Options.
Options:
Disabled
RF Jam Log
RF Jam Log & Report
RF Jam Log
RF House Code
Enter a two-digit code (00-31) and select “Done”. 0
Two Way Voice
Enable or disable Two Way Voice communication with the Central
Station.
The system toggles between “Disabled” and “Enabled”.
Disabled
Events - Log All
Enable or disable multiple options for event logging (i.e.; alarms,
troubles, open/close & bypass).
The system toggles between “Log All Set” and “Press To Log All”
NOTE:
Selecting “Press to Log All” will set all of the remaining options to
“Enabled”.
Press to Log All
Events - Log Alarm
Enable or disable Alarm Event Logging
The system toggles between “Disabled” and “Enabled”.
Enabled
- 8 -