Honeywell Lyric - Program Date Time

Lyric Controller Programming Guide
Program System Type (Continued)
Programming Field
Function and Action
Programmed
Default
Events - Log Bypass
Enable or disable Zone Bypass Event Logging
The system toggles between “Disabled” and “Enabled”.
Enabled
Events - Log Open
Close
Enable or disable Open/Close Event Logging
The system toggles between “Disabled” and “Enabled”
Enabled
Events - Log
Trouble
Enable or disable Trouble Event Logging
The system toggles between “Disabled” and “Enabled”
Enabled
Non Security
Enable or disable Non Security Event Logging (i.e.; Z-Wave, etc)
The system toggles between “Disabled” and “Enabled”
Enabled
Remote Access
Serial
Enable or disable end user to access their system via a website
The system toggles between “Disabled” and “Enabled”
Disabled
Multi Mode Serial
Enable or disable transmission of panel status events via email
(Active only when Remote Access Serial is enabled)
The system toggles between “Disabled” and “Enhanced Reports”.
Disabled
Program Date Time
Programming Field
Function and Action
Programmed
Default
Date Time
1. Using the left “<” and right “> “arrows select the Month and
Year then select the date. Select the “
˅” arrow to advance to
the next screen.
2. To set the correct time, touch the “Clear” button.
3. Enter the correct time and then select AM or PM. Select the “˅”
arrow to advance to the next screen or select “Save” to return
to the System Programming Screen.
None
Time Zone
Select the correct Time Zone.
Options:
Eastern (EST)
Pacific (PST)
Atlantic (AST)
Central (CST)
Alaska (AKST)
Newfoundland (NT)
Hawaii (HAST)
Brasilia (BRT)
Mountain (MST)
Mid-Atlantic (MAT)
Eastern (EST)
Daylight Savings
Time
Enable or disable Daylight Savings Time adjustment. If “Yes” is
selected the Start Month, Start Week, End Month and End Week
options will be active.
The System toggles between “Yes” and “No”.
Yes
Start Month
Select a Daylight Savings Time Start Month.
Options:
January
May
September
February
June
October
March
July
November
April
August
December
March
Start Week
Select a Daylight Savings Time Start Week
The System toggles between “First”, “Second”, “Third”, “Last”,
“Next to Last” and “3rd from Last”.
Second
End Month
Select a Daylight Savings Time End Month.
Options:
January
May
September
February
June
October
March
July
November
April
August
December
November
End Week
Select a Daylight Savings Time End Week
The System toggles between “First”, “Second”, “Third”, “Last”,
“Next to Last” and “3rd from Last”.
First
- 9 -