Honeywell Lyric - Control Smart Scenes

– 10 –
CONTROL SMART SCENES
Smart Scenes are created by using Total Connect. However, Smart
Scenes can be manually started (
Run) or placed on Hold using the
Lyric Controller Smart Scenes menu.
1
Press the
Smart Scenes
icon.
2
Enter Master User code.
3
All
Triggered
Anytime
Scheduled
Press
All
to list all the Smart Scenes programmed
in the system.
4
Select a Scene
Select the desired Smart Scene from the list.
5
Run
OR
Hold
OR
Show
To run the selected scene, press
Run
.
To suspend the selected scene, press
Hold
.
To remove the hold later, repeat these steps and
press
Hold
again.
To view the Smart Scene settings, press
Show
.