Honeywell Lyric - Page 3

- 3 -
Using Lyric
Using LyricUsing Lyric
Using Lyric sensors and alarms with HomeKit
sensors and alarms with HomeKitsensors and alarms with HomeKit
sensors and alarms with HomeKit
When an
When an When an
When an Alarm
Alarm Alarm
Alarm condition occurs
condition occurscondition occurs
condition occurs: A notification appears on the device whether or not the Home app is
running.
When there is no alarm condition
When there is no alarm conditionWhen there is no alarm condition
When there is no alarm condition: If the Home app is running, notifications appear on the device when a
Lyric sensor is faulted (open door/window, low battery condition, etc.).
Using
Using Using
Using Lyric
Lyric Lyric
Lyric with other HomeKit
with other HomeKitwith other HomeKit
with other HomeKit devices
devicesdevices
devices
While pairing must be performed with iPad® or iPhone®, Apple TV
Apple TVApple TV
Apple TV®
®®
® can also be used with Lyric via HomeKit.
Apple TV users must log in with the same Apple ID as the device initially paired with Lyric; use of other
iCloud features may be required.
Devices with a different Apple ID can access and operate your Lyric/HomeKit setup. However, an iPhone or
iPad with the original Apple ID must originate an “Invite
InviteInvite
Invite” from the Home app to new users.
Remote Access
Remote AccessRemote Access
Remote Access: An iPad or Apple TV on the same Wi-Fi® network as the Lyric/HomeKit pair can be set up
as a home hub
home hubhome hub
home hub, allowing HomeKit to be operated remotely via the internet.
Information on setting up a home hub can be found at http://www.apple.com/ios/home/
http://www.apple.com/ios/home/http://www.apple.com/ios/home/
http://www.apple.com/ios/home/.