. . . . .
UPGRADE MAXPRO NVR SOFTWARE
Overview
MAXPRO NVR 5.6 Installation and Configuration Guide 251
Upgrade to MAXPRO NVR 5.0 Build 509 Rev D
Upgrade to 5.0 is supported as explained below:
• From v4.0 Build 87 Rev H to MAXPRO NVR 5.0 Build 509 Rev D
• From NVR 4.1 Build 123 Rev B to NVR 5.0 Build 509 Rev D
• From NVR 4.5 Build 162 Rev B to NVR 5.0 Build 509 Rev D
• From NVR 4.7 Build 188 to NVR 5.0 Build 509 Rev D
• From NVR 4.9 Build 204 to NVR 5.0 Build 509 Rev D
Before Upgrading
Caution: If user had configured the Network drive as Recording drive in the
previous version of NVR, then after upgrading to 5.0 Build 509, none of
the cameras will display video. Ensure that you delete/modify the
Network path configured as Recording drive and then upgrade.
To upgrade to NVR 5.0:
1. Insert the MAXPRO NVR 5.0 setup DVD in the DVD drive, browse the DVD drive, and then
double-click setup.exe
Or
Go to the MAXPRO NVR setup folder on your computer, and then double-click setup.exe. A
dialog box appears with the question - “Do you want to validate the setup before continuing
MAXPRO NVR 5.0 installation ?”, click Yes to validate the setup files are not corrupted before
continuing the installation and click No to skip the validation to continue the setup. The
installation wizard starts and the Welcome screen (Figure 8-10) appears.
Figure 8-9 Welcome Wizard
To Next Page
Loading...
