. . . . .
MAXPRO NVR WEB CLIENT
Procuring and Installing CA Certificate
MAXPRO NVR 5.6 Installation and Configuration Guide 291
Viewing the Certificate Information
If you see the below security message then it may not be from the valid certificate authority
and it would be the case of self signed. It is recommended to exercise caution and verify the
certificate and check whether the certificate details are matching with the server machine.
To verify the certificate details:
1. Click Continue to this web site (not recommended) link to proceed. The NVR Web
Login page is displayed.
2. Click Certificate Error as shown below. The Mismatch Address pop up message is
displayed.
Figure 9-28 Program Maintenance
3. Click View Certificate. The Certificate dialog box is displayed.
To Next Page
Loading...
