. . . . .
LOGGING ON AND GETTING STARTED
Licensing Information
MAXPRO NVR 5.0 Installation and Configuration Guide 107
Figure 5-24 License Management Console
The License Management Console dialog box displays the number of days remaining in the
60-day activation period since the software was installed. You must purchase the license to
continue using MAXPRO NVR.
License Type is shown as Permanent if your NVR has been licensed. General Features shows
the license information on number of channels and clients.
Registration and Licensing
Registering the software only requires the Host ID file from the server system. This is a unique
ID generated for the NVR Server. Click the drum icon to create a Host ID. You are prompted to
select the path where you want to generate the Host ID (HID) file, and then click OK. Save the
file to a USB flash drive or hard drive.
Refer to the MAXPRO NVR Getting Started Guide for detailed information on registration and
licensing of Software only NVR.
Completing the Licensing
After you receive the license certificate, perform the following steps to license the NVR.
1. Download the License Certificate file and save it to a USB flash drive.
2. Launch MAXPRO NVR on the MAXPRO NVR Server.
3. From the User menu, click About.
4. On the MAXPRO® NVR dialog box, click License.
5. On the License Management Console dialog box, select Install License in the License
drop-down list.
6. The New License Configuration Wizard launches. Click Next.
7. On the Locate Your License File dialog box, click Browse to locate your license
certificate (for example, on the USB flash drive), and then click Next.
8. The License Comparison dialog box displays the details of the existing license and the
newly procured license. Compare the Existing License and the Selected License
columns corresponding to General Features and Devices. When you are satisfied, click
Next.
To Next Page
Loading...
